Newsroom

Newsroom

Circular Cement Expansion Mold

Circular Cement Expansion Mold

In a typical well cementing operation, a cement slurry is pumped into the annulus between the well casing and the bore hole. As the cement slurry hydrates, it undergoes a volume change which translates into bulk expansion or shrinkage. Knowing the amount of expansion or shrinkage allows users to design cement systems which can achieve optimal bonding with the borehole and well casing without sacrificing the integrity of the cement matrix. The Circular Cement Expansion Mold is designed to measure the expansion or shrinkage of well cement slurries according to the guidelines in API Recommended Practice 10B-5.

The Circular Cement Expansion Mold has an external ring with a vertical slit on one side to allow it to expand. Before testing begins, the width of the gap is measured with the included micrometer. The expansion mold is filled with a cement slurry and cured in a water bath or curing chamber. As the cement cures, the external ring will expand or contract with the cement slurry. At the end of the test, the gap is measured again to determine the expansion factor.

While more advanced equipment is available, the Circular Cement Expansion Mold is a cost effective method for testing expansion/shrinkage of well cements. To learn more, visit the product page.

Electronic Temperature Control
Introducing the Mud Aid™

Related Posts